Cheap Hotel Furniture Manufacturer Introduces The Inspection Process Of Hotel Furniture
2021-3-11
Cheap Hotel Furniture Manufacturer introduces the steps to check and accept hotel room furniture:
1.Strict joints of veneer furniture: Whether it is pasting wood veneer, PVC or pasting pre-painted paper, pay attention to whether the leather is smoothly pasted, whether there are bulges, blisters, and loose joints. Look at it when checking, otherwise, you won't be able to see it.
2.Appearance details and accessories: For mirror furniture, check whether the mirror is deformed or discolored, and check whether there is lining paper and backboard at the mercury behind the mirror. The paint should be smooth, flat, free of saliva, wrinkles, and no bumps. The corners should not be right-angled, and the corners are easy to chip off and paint off. Whether the installation of hardware fittings of furniture is complete, regular, and reasonable.
3.Excellent material and wear-resistant: E1 grade environmental protection board must be used for the board, and the furniture material must have fire resistance and high temperature resistance; the purchased furniture should have the function of waterproof and moisture-proof. And to have wear-resistant and durable quality, furniture should choose products that can maintain good appearance and quality for a long time, and have a high price-performance ratio.
Through the above introduction, Hotel Guest Room Furniture Manufacturers hopes that you can simply refer to the content of this article in future use.
------------------------------------
Cheap Hotel Furniture Manufacturer Introduces The Design Details Of The Model Room
2021-2-25
Cheap Hotel Furniture Manufacturer introduced the key points of model house design:
1. Positioning:
The design of the house type is the direct concern of buyers, and this is also the issue that developers must first consider. Then there is the design problem of the model house. Positioning refers to the consumers you are facing, whether it is an advanced consumer or an intermediate consumer. This is market positioning. This also determines whether your model house design is luxurious or economical.
2. Relevance:
No matter how beautiful the clothes are designed, if they do not match your size and body shape, they may not be able to set off your temperament. Therefore, better software design and software decoration may not be able to achieve the best results if they cannot be integrated into the overall design of the building. Model room The design of the building depends on the positioning and sales of the building. The design of the model room must be related to the positioning and selling point.
3. Objective:
Ordinary residential decoration design generally only serves a certain individual to meet the living needs of individual families. The model house is designed for a specific target customer group. The upholstery designer should analyze the common lifestyle needs of this group and express them through design language to maximize the market.
4. Demonstrative:
The primary function of model house design is to cooperate with sales and emphasize the sensory effect. Customers may not necessarily use it. The main function of ordinary houses is to live. Therefore, it is not advisable for such model room cabinets to only be seen and cannot be used. Many developers hope that model houses can be sold to customers in the future, which requires making model houses both beautiful and practical.
5. Touching:
In order to promote sales, the soft decoration design of the model house needs to be exaggerated to achieve the stage setting effect, which is very inflammatory. Create a very attractive and attractive atmosphere effect through light, shape, color, and decoration, capture the hearts of customers, and stimulate customers' desire to buy.
Through the above introduction,Hotel Guest Room Furniture Manufacturers hopes that you can simply refer to the content of this article in future use.
---------------------------
Hilton Hotel Furniture For Sale Manufacturer Introduces Related Knowledge Of Hotel Wooden Furniture
2021-1-21
Hilton Hotel Furniture For Sale manufacturer introduces the production standards of hotel wooden furniture.
1. The problem of edge sealing of wood-based panels.
Wooden office furniture is mainly made of man-made panels. Wooden office furniture has paint furniture and offsets furniture. Painted office furniture is mainly pasted with solid wood veneer, which is a whole skin pasted, and generally does not need edge banding. The main use of the cover is the offset office furniture. The waterproof effect is achieved by pasting the waterproof paper skin and using the offset edge sealing.
2. The strength of the drawer track
The strength of the drawer track is the easiest to ignore, and the drawer is mainly used for paint office furniture. Because the denser density board is used, the weight of the drawer is relatively large. If the strength of the track is not enough, the drawer will be damaged and fall down. The inspection method is: pull the limited drawer or keyboard tray to the maximum position, pull the drawer or keyboard tray without limit to the 2/3 position of the full length, and apply the force on the top of the drawer panel or the top center of the keyboard tray. It is 350N, press 10 times, the drawer slides must not be deformed or fall off.
3. Why does the drawer rail have problems:
① Some illegal slide manufacturers are pursuing economic benefits unilaterally, reducing the thickness of slide materials, resulting in soft slides;
②When installing furniture, some workers pursue installation speed, which reduces the number of screws on the slide;
③The drawer slide is too long, etc. In this regard, furniture manufacturers should strengthen the quality control of the procurement of the slide, strengthen the job training for the installation workers, and further improve the process design of the products to solve such problems again.
---------------------------
Hotel Guest Room Furniture Manufacturers Introduces The Height Of The Wooden Door
2021-1-7
Hotel Guest Room Furniture Manufacturers introduces the wooden door sizes of different rooms:
1. The height of the wooden door: The size of the door needs to be reduced from the installation gap. Generally, the installation gap of height and width should be reserved about 2 cm! The door is the first to enter and exit. Because there are large items to enter and exit, the specifications and sizes are required to be larger. Generally, the opening size is 1000mm to 1200mm, and the width of the door is about 920mm. Taking into account the safety of entry and exit and the traditional Tibetan habit of architecture, glass doors are generally not used except for special requirements. The bedroom doors emphasize privacy, so most of them use panel doors. The size of the opening is 900mm, which is smaller than the door, and the door leaf is about 820mm. The study door can be translucent, full glass door or half glass door, or art glass such as frosted, cloth pattern, color strip, electric engraving, etc. The specifications are the same as the bedroom door. The kitchen door can be used for either through-view or semi-through-view. The door opening is slightly smaller than the bedroom or study door, generally 750mm to 800mm, and the door leaf size is generally 670mm to 720mm.
2. Width of wooden doors: general residential household doors are 0.9~1m, compartment doors are 0.8~0.9m, kitchen doors are about 0.8m, and bathroom doors are about 0.7~0.8m. Due to the import of modern furniture, the size of wooden doors nowadays takes the upper limit. . In general residential buildings, the height is 1.5m, plus the height of the window sill is 0.9m, and the window top is 2.4m away from the floor, leaving a structural height of 0.4m. Everyone is familiar with the balcony, but its railing height should not be less than 1.0m in multi-story buildings, and should not be less than 1.10 in high-rise buildings. Generally, high-rise buildings try not to set up balconies or close them. This involves many problems such as strong winds, heavy rains, and injuries from falling objects.
---------------------------
Cheap Hotel Furniture Manufacturer Introduces Tips For Customizing Furniture
2020-12-24
In the true sense of hotel furniture customization, Cheap Hotel Furniture Manufacturer introduces various aspects including furniture layout, production technology, furniture design, and logistics. Hotel custom furniture has the advantages of high efficiency, low cost, and speed, and quickly occupy each hotel. Decoration needs. At the same time, it also strengthens the advantages of mass production and customized production.
The so-called hotel furniture customization, as the name suggests, is to tailor furniture products according to the hotel operator's own ideas, the style of the entire hotel and the layout of each functional area. When designing furniture, the first thing to consider is the size and location of the furniture. Nowadays, the layout of many suites is relatively irregular, so irregular walls are often encountered when installing furniture, but the advantage of custom furniture is that we can design and make according to the layout of the entire suite. The effect of this is to make full use of limited space and improve space utilization.
The customized high-end five-star furniture is very different from the mass production furniture on the assembly line. Because almost all custom-made furniture are different, this will result in a significant drop in the output per unit of wood or plank. Customized high-end five-star hotel furniture is based on large-scale production by furniture companies, treating each consumer as a separate market segment, and designing and manufacturing consumer-specific furniture according to their own requirements.
In fact, "customized furniture" in the true sense is not only the exclusive production of furniture styles, but also the personalized services of design layout, production technology, logistics, installation, and after-sales service. This kind of customized service has been popular in Europe, America and Japan for many years, and the market operation is basically mature.
Ordinary finished furniture is relatively for all levels of the public, but it is difficult to meet the individual needs of some people. You may also occasionally have this kind of citrus. A piece of furniture looks good in the exhibition hall, but when it moves to your own house, it looks overshadowed. Either the size of the space does not match the size or the shape does not match the overall decoration style. In this case, custom furniture is particularly important.=
----------------------------------
Zhuanghe Shares A Merry Christmas Atmosphere
2020-12-17
When Christmas is coming, Zhuanghe wishes everyone a happy life and a smooth career.
Christmas is here again one year, and there must be no less blessings; Santa Claus laughs and asks you if you can receive gifts; good luck will hold you back and vowed to stay with you until you are old; Zhuanghe sends blessings, I wish you every year Good year!
Zhuanghe Furniture CO., LTD. was established in 2009 and is engaged in hotel furniture industry. With the vision of "creating a Chinese sample of the global furniture industry and becoming more respected international enterprise" and adhering to the core price concept of "respecting others and benefiting others and reaching oneself".
Welcome to visit the company's official website to learn more www.luxuryhotelfurniture.com
--------------------------
Hotel Guest Room Furniture Supplier Introduces How To Buy Hotel Furniture
2020-12-10
Hotel Guest Room Furniture Supplier introduces the purchasing strategy of five-star hotel furniture:
1. Waterproof and moisture-proof: In hotel and apartment rooms, the furniture is often damaged due to the intrusion of water and humidity. The dumping of tea, the diffusion of bathroom humidity and steam from bathing and sauna, the contact of bathing wet towels, seasonal climate and humidity changes, etc., will cause the edge of the furniture to be exposed, fall off, deformation and expansion of the board, surface cracks, blisters, Problems such as mildew, so the purchase of furniture should focus on its waterproof and moisture-proof function;
2. Fire resistance and high temperature resistance: ignited cigarettes, matches, etc. will damage the surface of the furniture, and even cause fires. The fire resistance and flame retardancy of furniture cannot be ignored;
3. Wear-resistance: conventional room appliances, such as telephones, ashtrays, tea cups, desk lamps, flower pots, laptops, suitcases, electric water heaters, etc., may rub against the surface of the furniture in daily use, causing scratches and impact The useful life of the furniture. The wear resistance of furniture panels is one of the important factors that determine the useful life of furniture;
4. Environmental protection: Furniture materials: such as particleboard, fiberboard, glue, paint, etc., will release harmful gases to the human body. The hotel and apartment rooms are relatively closed, and the irritating gas will directly affect the room occupancy rate. The environmental protection of furniture has become an important factor for modern guests to choose to stay in hotels;
5. Style, style and design: The style and style of the furniture should be in harmony with the decoration style, avoid simple decoration with luxurious furniture, or luxurious decoration with low-end furniture; furniture selection should consider the location of the hotel and apartment, customer-oriented, Guest room pricing and investment restrictions, etc., should be centered on guest preferences and consumption concepts, and reasonable furniture design and product styles should be used to make up for the lack of architecture and decoration, and to enhance the hotel's grade and characteristics;
6. One-time investment and preservation time: In order to ensure that the aging and damage of the furniture will not affect the guest occupancy rate, in addition to the one-time investment cost, the furniture selection should also consider the repeated cumulative investment in the furniture during the renovation operation. Repeated investment is required to maintain good appearance quality and high cost performance products for a long time. At the same time, the warranty time given by the furniture company should also be considered.
7. Artisticity: The design of hotel room furniture will play a certain role in the overall image of the hotel, and the excellent design will also leave a good impression on customers. In furniture design, according to different types, the shape, material and color of the furniture are also changing accordingly. In addition to the design, the quality of hotel room furniture is also an important aspect, so we must give it both practicality and function Sex, it should also have a noble aesthetic taste. The sophisticated design can complement each other with the hotel room furniture, and the art appreciation has also been improved.
8. Ease of cleaning: The hotel room furniture is equivalent to one of the hotel facades, so the cleaning of the room furniture is a must and is particularly critical. Hotel room furniture is the first impression of customers after entering the room. What we should pay attention to is not to wipe the furniture with coarse cloth or old clothes. Regular cleaning to prevent dust intrusion is the best way to maintain hotel room furniture.
9. Practicality: From a practical point of view, the corners of the room furniture should be obtuse or rounded, so that it will not harm the young and under-tall guests; the TV should be set below Rotating partitions, because many guests need to adjust the angle of the TV when watching TV; the socket design should consider the use of mobile phones, which is often neglected in the design of many hotel rooms; bedside lamps should be carefully selected to prevent glare; computers The layout of the Internet line should be thoughtful, and the location of the socket should not be too far away from the desk. In this way, the humanized standard of hotel room furniture design can be reached.
-------------------------
Hotel Guest Room Furniture Factory Introduces The Knowledge Of Maintaining Hotel Mattresses
2020-12-3
Hotel Guest Room Furniture Factory introduces how to maintain hotel furniture mattresses
1. Remove the plastic coating. New mattresses are usually covered with a packaging film to ensure that they are not contaminated during transportation. Many consumers think that tearing off the packaging film can easily stain the mattress. In fact, the mattress is covered with packaging film but not breathable, which is more prone to dampness, mildew, and even smelly.
2. Turn over regularly. In the first year, the newly purchased mattress is turned over every two to three months. The sequence includes the front and back sides, the left and right sides, the upper and lower sides, so that the springs of the mattress can be evenly stressed and prolong the service life. After the second year, the frequency can be slightly reduced, and it is enough to flip once every six months.
3. Dust removal and cleaning. Mattress maintenance also requires regular dust removal and cleaning of the mattress. Due to the material problem of the mattress, the dust removal of the mattress cannot be cleaned with liquid or other cleaning agents or chemical cleaning materials, but a vacuum cleaner is needed to clean it. The use of liquid cleaning products will damage the mattress and cause the metal inside the mattress to be stained with liquid and rust. This will not only reduce the service life, but also have an adverse effect on human health.
4. Auxiliary items. Maintenance of the mattress requires us to pay attention to maintenance in the daily use process. In daily life, mattresses are equipped with sheets, bedspreads and other auxiliary items. This is the most convenient and simple way to maintain the mattress. The bed sheet can extend the life of the mattress, reduce the abrasion of the mattress, and is also convenient to remove and wash, so it is also easy to clean the mattress. When using bed sheets and other auxiliary items, you need to wash and change frequently to keep the surface clean.
5. Drying treatment. The climate in our country is changeable, especially the southern regions are prone to moisture. Mattresses need to be ventilated and dried during long-term use to keep the mattresses dry and fresh in a humid environment. In addition, it should be noted that if the mattress is not used for a long time, it should be packed with air-permeable packaging, packed with a bag of desiccant, and placed in a dry and ventilated environment.
6. Regular replacement. Many people think that as long as the mattress is not broken, there is no need to replace it, but generally speaking, the effective life of a spring mattress is generally about 10 years. After ten years of use, the spring of the mattress has undergone long-term heavy pressure, causing its elasticity to change to a certain extent, resulting in a gap in the fit between the body and the bed at this time, so that the human spine cannot get the most effective support. In the bent state.
------------------
Hilton Hotel Furniture For Sale Manufacturer Introduces Custom Furniture Is The Trend
2020-11-19
The core part of customized hotel furniture is drawing deepening: only when drawing deepening is in place, it is possible to produce furniture with reasonable structure and reasonable proportions. Because whether it is hotel furniture or other engineering furniture customization, there are such characteristics. Various styles, more or less quantity, complex materials, diversified processes, and restrictions on site conditions lead to special installation requirements. Many times a hotel furniture project worth 5 million yuan may involve more than a thousand categories of furniture, dozens of types of wood, panels, and fabrics. If the deepening of the drawings is not in place or the statistics are not appropriate, it will bring many problems to the hotel or the completion of the project. Then follow Hilton Hotel Furniture For Sale Manufacturer to see the solution.
After the completion of the project, the project team must meet to review the production process, communication process and furniture quality, and other issues, and implement continuous quality improvement.
Each project will automatically form a project team, from document order, production, inspection to documents, which is convenient for information feedback and emergency quality incident handling.
Deepen the three-layer review of drawings, the designer's self-inspection, the technical quality director review, and the project manager's approval can be sent to the production workshop.
Before each piece of furniture is produced, the design department shall print a one-to-one proofing drawing, and the business and design shall jointly explain the drawing and material requirements to the production department.
Each project forms a corresponding folder, manages the furniture and on-site drawings of each project in a unified manner, and distributes changes, and archives one by one to achieve dedicated record management.
Through the above introduction, Cheap Hotel Furniture Manufacturers hopes that you can simply refer to the content of this article in future use.
---------------------------------
Luxury Hotel Furniture Manufacturers Introduces The Acceptance Tips Of Custom Furniture
2020-11-12
Customized hotel furniture has become a popular way in the hotel industry. Customization can make reasonable use of every inch of hotel space, which is more in line with hotel aesthetics and can also meet the individual needs of consumers. Therefore, hotels now choose customized hotel furniture. Next, Luxury Hotel Furniture Manufacturers will introduce the acceptance method of custom furniture.
1. Inspection process:
If you want to know whether custom furniture is qualified, it depends on the details of the work. It can be distinguished according to the combined parts, and the firmness of the connection points between the various parts of the furniture can be checked. For furniture with an overall structure, each connection point should be sealed, and there should be no signs of cracks and looseness. During the inspection, check whether the drawers and cabinet doors are flexible and whether they can be returned correctly.
2. Check the size
For hotel furniture customization, customized furniture is not only for beautiful decoration, but also has strong practicability, conforms to people's usage habits, and is the size reasonable.
3. Check the structure.
Check whether the structure of the customized furniture is reasonable, whether the frame is correct and firm, and gently push it by hand. If you find shaking or rattling, it means that the customized structure of the hotel furniture is not strong, and the verticality and warped bottom of the furniture should be checked.
4. Check the appearance
If you want to carefully check the quality of hotel furniture customization, first check the appearance. The method is similar to checking the quality of doors and windows. Mainly check whether the surface paint film is smooth, bright, and whether the quality is defective, such as shedding, bubbles, etc. In addition, check whether the decorative board has color difference and whether the pattern is consistent. In addition, we also need to know how the edges of wood-based panel parts are processed.
5. Check the accessories
The quality of hotel furniture customization depends on accessories such as mats and non-slip mats.
Through the above introduction, Custom Hotel Furniture Manufacturers hopes that you can simply refer to the content of this article in future use.
------------------------------
Hotel Furniture Factory Introduces How To Select Furniture Materials
2020-11-05
Hotel furniture customization has become more and more popular. Furniture customization needs to meet the requirements of beautiful appearance and solid quality. Therefore, Hotel Furniture Factory introduces the choice of material for hotel furniture customization.
1. The choice of wood chipboard
Particleboard is also called particle board. Most of its materials are taken from artificial or natural forest trunks and branches for processing. The long wood fiber in the middle and the fine wood fiber on both sides are pressed into a board by the method of high temperature and high pressure. The size of particleboard is 18mm and 25mm, because of its advantages such as low expansion rate and strong stability, it is often chosen when customizing five-star hotel furniture. However, there are often big differences in the quality of particleboards on the market, and it is not easy to distinguish between true and false. Some particleboards have very rough edges, causing moisture to enter, loosening in the board, and the quality of the particleboard is greatly reduced. Be very careful when choosing.
2. The choice of fiberboard
Fiberboard is often used when customizing five-star hotel furniture. Compared with particleboard, fiberboard has a flat surface, good stability and load-bearing capacity, and its internal structure is compact, not easy to loose, and has a strong ability to maintain the original shape, whether in strength or In terms of hardness, it is more suitable than particle board. Fiberboard is made by pressing powdered wood fiber at high temperature, which is not easy to deform and easy to disassemble and transport. Furthermore, melamine is commonly used to process fiberboard on the market. Therefore, fiberboard has the advantages of moisture resistance, wear resistance and high temperature resistance, but due to processing The cost of fine investment is high, and the price of fiberboard is relatively high.
3. The choice of blockboard
Another material is blockboard, which we can also call big core board. This material is mainly made of natural peeling veneer and solid wood jigsaw through gluing, hot pressing and other procedures. The production methods of blockboard can be divided into two types, divided into machine assembly and manual assembly. The manual assembly method is mainly to use manpower to inlay wooden slats in the plywood of wooden slats, but this method is made. Blockboard has poor squeeze ability and is not suitable as a material for cutting. But the board assembled by the machine does not have this disadvantage, on the contrary, it has a strong weighing capacity and is not easy to deform.
Through the above introduction, Hotel Furniture Manufacturer hopes that you can simply refer to the content of this article in future use.
----------------------
3 Star Hotel Furniture Manufacturer Introduces The Customization Requirements Of Hotel Furniture
2020-12-22
3 Star Hotel Furniture Manufacturer introduces that the customization of furniture is a problem worth considering. A good decoration does not fully affect the overall characteristics of the hotel, but it is not the same with custom-made hotel furniture. A characteristic hotel is easy Let customers have a deep impression, and there will be endless praise for the hotel; but how to choose hotel furniture customization? Below we come to the detailed following at the end of the month:
As far as pure art or practical art is concerned, the interior furnishings of the hotel should be related to many factors in the surrounding space, such as form, color and texture. Form and space restrict and reflect each other, and jointly create the regional characteristics of the overall space. Any display of artwork must not only display its own theme, but also coordinate with the space. Only in this way can it reflect the decorative beauty of different spatial characteristics, form a unique environmental atmosphere, and endow it with profound cultural connotations. The size and form of indoor display items should have a good proportional relationship with the scale of indoor space furniture.
The indoor furnishings are too large, which often makes the space seem small and crowded, creating a feeling of depression and depression, and too small may make the space hollow. The basic characteristics of internal design can be reflected by integrating the relationships between components. Therefore, if you do not consider the interrelationships among elements such as colors, lighting, lines, forms, patterns, textures or spaces in the composition, you cannot consider any furniture design as an internal whole or integral part. Some of these composition elements will play a certain role in the overall effect, forming a beautiful composition.
-------------------------------------------
Hotel Furniture Manufacturer Introduces What Hotel Furniture Is
2020-10-15
Nowadays, many people have different concepts on the choice of colors, but they are not very clear about the different colors. I don’t know if you can customize suitable hotel furniture. Today, follow the Hotel Furniture Manufacturer to take a look at the market. Customized hotel furniture in different colors commonly seen on the Internet.
1. Blue: It is a color that makes people think about it. On the other hand, it is also a very serious color. This strong color can hide the shortcomings of other colors to a certain extent and is a convenient match The color and blue environment also make people feel elegant and peaceful.
2. Pink: It is a good interpretation of gentleness. This red and white mixed color is very clear and bright. Pink means "like water and tenderness".
3. Green: It is a kind of color that makes people feel stable and comfortable. Green also represents positive and youthful vitality. Natural green has a certain effect on fainting, fatigue, nausea and clear emotions.
4. Orange: It is a color that can generate vitality and induce appetite. It is also a representative color in the warm color system. It is also a color that represents health. It contains the meaning of maturity and happiness.
5.Yellow: It is the first color that people see when they are born. It is a color that symbolizes health. The reason why it appears healthy and bright is also because it is the most easily absorbed color in the spectrum.
6. Red: It is a more irritating color, it gives people a feeling of burning and provocative. But it is not suitable to connect too much, otherwise it will easily cause anxiety and emotional stress, and fatigue. General furniture choice Dark red is better, and a moderate amount of red can induce appetite.
---------------------------
Hilton Hotel Furniture For Sale Supplier Introduces The Characteristics Of Leather Sofas
2020-9-25
Hotel furniture leather sofa is a sofa made of cowhide, pigskin, horse skin, and donkey skin as sofa materials. It has natural pores and skin textures, and is full, soft and elastic. It is commonly used in hotel furniture. article. The leather sofa has been honed over time and endured for a long time. It has always been loved by people for its magnificent, luxurious and durable features. Then Hilton Hotel Furniture For Sale Supplier introduces what skills should be paid attention to when purchasing hotel leather sofas?
Distinguish whether it is dermis. Leather sofas are divided into leather and imitation leather. The leather is made of natural leather, mainly cowhide and pigskin; imitation leather is artificial. The performance and price of the two are quite different, so pay attention to the distinction when buying. Generally, natural leather has regular natural pores and grains, but imitation leather does not. Even if there is, it is artificially made, which is easier to distinguish. It can also be distinguished from their cross-sections. Natural leather is interwoven with leather fibers, while imitation leather does not have this structure.
Purchase according to material. Leather sofa is actually a general term. Pigskin, horse skin, donkey skin, and cowhide can all be used as raw materials for sofas. You must figure out what kind of leather you are using. Among them, cowhide leather is soft, thick, and of the best quality. Nowadays, buffalo leather is generally used for sofas, which are thicker and affordable. Even better are yellow leather and green leather. The skin texture of horse skin and donkey skin is similar to that of cowhide, but the surface of the skin is green and loose, and it is easy to peel off after a long time, and it is not durable, so the price is cheap.
Look at the sofa skeleton of the hotel furniture design. To see whether the sofa frame is strong, it is related to the service life and quality assurance of the sofa. The specific method is to raise one end of the three-seater sofa, and pay attention to whether the leg on the other end is off the ground when the raised part is 10cm away from the ground. Only when the other side is also off the ground, the inspection is considered to be passed.
Look at the sofa stuffing. Fillers mainly refer to sponges. According to their elasticity, sponges are divided into three types: high elasticity, high elasticity and super softness, and medium elasticity. The specific method is to press the armrest and backrest of the sofa with your hands. If you can clearly feel the presence of the wooden frame, it proves that the filling density of the sofa is not high and the elasticity is not good enough. The sofa wooden frame that is easily pressed will also accelerate the wear of the sofa jacket and reduce the service life of the sofa.